This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

[FAQ] AWR2944: X-Ray Sensitivity

Part Number: AWR2944
Other Parts Discussed in Thread: AWR2E44

TI does not typically specify acceptable x-ray levels on the device datasheet.

Experience has shown that most TI products will NOT be sensitive to typical x-ray inspection (with typical exposures < 100 rad(Si)). Texas Instruments suggests that X-ray exposures over these limits, however, may cause damage to the device and should be avoided.

With that said, Automotive parts AWR2944 and AWR2E44 have been bombarded with X-Ray levels of above 2500 rad(Si) by Tier 1 customers and still dont show any sensitivty and work perfectly fine.

Such X-Ray rating would hold true for all Radar devices.