AWR2544LOPEVM: Question about 3D waveguide Antenna

Rata Zhang

Part Number: AWR2544LOPEVM

Hi,

The AWR2544LOP EVM includes AWR2544LOP board, 3D waveguide antenna, Micro USB cable, Ethernet Cable etc. Now if we make the AWR2544LOP board, but 3D waveguide antenna can not be achieved according to our technological level,can we only purchase 3D waveguide antenna？ If it is, How about the prices?

Rata

over 1 year ago

0 Jitendra Gupta over 1 year ago

TI__Guru 69960 points

Hi Rata,

You need to approach 3rd Party who can help you on 3D waveguide antenna.

Let me assign this thread to expert who can rightly help you here.

Regards,

Jitendra

0 Josh Wyatt over 1 year ago in reply to Jitendra Gupta

TI__Guru* 91206 points

Rata -

As Jitendra stated, you will need to leverage a 3rd party for this. I have contacted the vendor for the antenna used on the AWR2544EVM to see the best way to connect the two of you. Since I sent over the request today and they are not in US, please allow at least until Monday to get exact contact and method to connect back to you. Thanks for your patience.

0 Josh Wyatt over 1 year ago in reply to Josh Wyatt

TI__Guru* 91206 points

Rata -

Sorry for the delay - the vendor we used (as mentioned in the EVM user guide) for the AWR2544EVM was Golden Devices. I am still waiting for exact contact information and will pass that your way once it is received.

0 Josh Wyatt over 1 year ago in reply to Josh Wyatt

TI__Guru* 91206 points

Rata -

Thanks for your patience - here the contact which can be used for Golden Devices waveguide antenna sourcing is: info@golden-devices.com or directly to email: mark.sippel@golden-devices.com, as well as via Linkedin ==> https://www.linkedin.com/in/mark-sippel-997b7a1b9/?originalSubdomain=de

Sensors

Sensors forum

AWR2544LOPEVM: Question about 3D waveguide Antenna