• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 568 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR2944: Port the EGE compression from MATLAB to C66/C7

Sowbhagya Appalla
Prodigy 60 points
Part Number: AWR2944

Hello E2E community,

I want to run the compression and decompression in DSP instead of HWA. I have gone through the link where I could access the MATLAB files for EGE compression:


https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/1320027/awr2944-implement-compression-without-hwa/5018964#5018964

I am able to run it in MATLAB and got the results. I want to port the same in c66x/ c7x dsp. I am not able to access the source code under .mex file - ExpGoloumbEncDec, can anyone help me to access the source code inside mex file and any other pointers to do the porting. 

Thanks & regards,
Sowbhagya

  • 0
    TI__Mastermind 20605 points

    Hi Sowbhagya,

    We do not share the source code for this algorithm under the mex wrapper. It is a general algorithm, information regarding which can be found online. Would kindly urge you to look into those and have your own implementation. The mex wrapper provided in the RTB is only for a quick check to compress/decompress any data dumps you might have with respect to the device. 

    Regards,

    Kaushik