TMAG5173EVM: TMAG5173EVM software doesn't connect with SCB

Andrew V

Part Number: TMAG5173EVM

I am unable to run the software. The sheer complexity of the s/w installation process is unbelievable. It forced me to install a USB driver, and at least three other s/w and components, and yet, no matter I do it fails to connect to the SCB controller.

over 1 year ago

0 Alicia Rosenberger over 1 year ago

TI__Genius 13690 points

Hi Andrew,

Thank you for posting to the Sensors forum!

When you connect the SCB to your computer and check Ports (COM & LPT) under Device Manager, how is the SCB displayed?

Best,

~Alicia

0 Andrew V over 1 year ago in reply to Alicia Rosenberger

Intellectual 280 points

USB Serial Device (COM7)

0 Alicia Rosenberger over 1 year ago in reply to Andrew V

TI__Genius 13690 points

Hi Andrew,

To help make sure that I have the full picture, were you able to flash the TMAG5x73EVM firmware to the SCB by putting the SCB into DFU mode, then uploading the firmware?

Best,

~Alicia

0 Alicia Rosenberger over 1 year ago in reply to Alicia Rosenberger

TI__Genius 13690 points

Hi Andrew,

Just wanted to check in to see if your issue has been resolved. If it has, please mark this thread as "Resolved". I am going to close this thread, for now, due to inactivity. If you have any additional questions, please feel free to re-open this thread or ask a related question.

Best,

~Alicia