IWR6843AOPEVM: CAD files

Hi Frank, 

Were looking into your question. Someone will respond within 24 hours. 

Best Regards,

Josh

Thanks. Another question is with respect to the heat sink for IWR6843AOPEVM. I just learned from Mouser that the heat sink was not included in the kit even though it is part of it in the picture. Is there a off-the-shelf heat sink that I can buy? I would rather not make it by myself, if there exists other alternatives.

Hi Franks,

Please find below the design files for IWR6843AOPEVM, IWR6843ISK-ODS EVM, DCA1000EVM and mmWaveICBOOST.

https://www.ti.com/lit/zip/sprr418

https://www.ti.com/lit/zip/swrc356

https://www.ti.com/lit/zip/sprr350

https://www.ti.com/lit/zip/swrc355

Please allow me some time till early next week to look into the Heat Sink requirements.

Regards

Ankit

Hello Ankit,

Thank you for sharing. However, after going through all the downloaded files, I found that only sprr350a contained a CAD file (.STEP) for DCA1000. The rest contain very detailed PCB design but no CAD files. Hopefully I didn't miss out anything. Please double check that and thank you for your help.