AWR1843AOP: AWR1843AOP

Hyunung Park

Prodigy 50 points

Part Number: AWR1843AOP

I know how to share data between SBL and MSS after mss do soft reset.

8 months ago

0 Samhitha Bobba 8 months ago

TI__Genius 9890 points

Hi Hyunung,

Can you be more clear on what is required?

Regards,

Samhitha

0 Hyunung Park 8 months ago in reply to Samhitha Bobba

Prodigy 50 points

Application do soft-reset after any value set. At this time, how sbl get data which application set after reset?

0 Samhitha Bobba 8 months ago in reply to Hyunung Park

TI__Genius 9890 points

Hi Hyunung,

After R5 core soft reset, it starts running from 0x0. Interrupt vector table is present at 0x0. From here it branches out to c_int00 and then to main().

Hyunung Park said:
At this time, how sbl get data which application set after reset?

Once the application images are loaded on to the respective cores by SBL, the control is passed to the application.

Refer to AWR294x Primary and Secondary Bootloader (ti.com) to understand RBL and SBL boot flow.

Regards,

Samhitha

Sensors

Sensors forum

AWR1843AOP: AWR1843AOP