DRV5056: Hall sensor

shrey gupta

Part Number: DRV5056
Other Parts Discussed in Thread: DRV5032

hi,

I wish to use a new hall ic for 10mT range , i would like to know if any other hall sensor which detects in between 5mT-11mT , please let us know.
Until now, I have been using DRV5056A2 for my whole system design

Also, i want analog output for the same.

7 months ago

0 Jesse Baker 7 months ago

TI__Expert 7655 points

Hi,

The webpage linked here shows an overview of our 1D linear hall-effect sensors with analog output. DRV5056 is our only unipolar 1D linear device (responds to south pole at the top of the package). We offer other 1D linear devices that are bipolar (detect both north and south poles at the top of the package). The DRV5053A1, DRV5055A1, or TMAG5253A1 may be of interest to you.

https://www.ti.com/sensors/magnetic-sensors/linear-hall-effect-sensors/overview.html

If you only need to detect whether a north or south magnetic field present, you could use a Hall-effect switch. These devices change output between high and low level depending on a magnetic threshold. The link below shows an overview of our Hall-effect latches and switches. The DRV5032, for example, offers 3.9mT, 4.8mT, and 9.5mT magnetic threshold options.

https://www.ti.com/sensors/magnetic-sensors/hall-effect-latches-switches/overview.html

Best regards,

Jesse

Sensors

Sensors forum

DRV5056: Hall sensor