LMT01: LMT01 with AM62A3

Abhineet Ranjan

Part Number: LMT01
Other Parts Discussed in Thread: AM62A3

Hello Ti,
I am using LMT01 with AM62A3 we are getting following signal on oscilloscope but we are unable to count pulse on GPIO,
can you provide driver code for the same,

Thank You
Abhineet Ranjan

8 months ago

0 Abhineet Ranjan 8 months ago

Intellectual 485 points

Is there any update?

0 HarryG 8 months ago

TI__Intellectual 2230 points

Hello Abhineet,

While I check with our software team, are you talking about a Linux Kernel driver?

Regards,

Harry

0 Abhineet Ranjan 8 months ago in reply to HarryG

Intellectual 485 points

Yes Sir

0 HarryG 8 months ago in reply to Abhineet Ranjan

TI__Intellectual 2230 points

Hello Again Abhineet,

Thanks for your patience.

After checking with the team, we currently don't make any official T.I.-issued Linux Kernel drivers, especially for the LMT01. I did find one driver on GitHub: https://github.com/FARLY7/lmt01-driver, but I would caution as since this is not an official driver from T.I. we do not contribute to, or have any control over, the linux kernel driver and cannot guarantee full functionality.

I hope this works for you and feel free to reach out if you have any other questions!

Harry

Sensors

Sensors forum

LMT01: LMT01 with AM62A3