DCA1000EVM: How do I stream IQ data from IWRL6432 (ES1) with DCA1000 using DCA1000 CLI tools

HI, Gayatri:

You will need to find the older version of the toolbox and it contains the binary and configuration file for ES1. 

Here the link to the older version

dev.ti.com/.../node

Best,

Zigang

Thanks Zigzang. I will try this. Is there a version of the SDK which supports both ES1 and ES2 boards ?

HI, Gayatri:

Unfortunately, we do not have any SDK support both ES1 and ES2.  

Best,

Zigang

Thanks for the info. 

In the link mentioned, I see the below under Bugs and limitations

"For the xWRL6432 device, this package is tested and works with MMWAVE_L_SDK_05_01_00_04. The
data format has changed since MMWAVE_L_SDK_05_02_00_02. We are still working on modifying the
data parsing to support the newer version of SDK L. "

I am using mmwave L SDK 5.2, can you share the data parsing for mmWave L SDK 5.2

Thanks in advance 

Can you point me to doc that contains data format of ADC data for L SDK 5.4 and 5.2 ?

Hi, Gayatri:

You need to modify the following target code in common_full.c with the change of the highlighted value, and rebuilt in the CCS project, then you will be able to use the same capture tool. 

Best,

Zigang

if (gMmwMssMCB.adcLogging == 1)
{
ptrOpenCfg->fecRDIFCtrlCmd.c_RdifEnable = M_RL_FECSS_RDIF_ENA;
ptrOpenCfg->fecRDIFCtrlCmd.c_RdifCfg = 8U;
/*((M_RL_API_CTRL_ON << M_RL_FECSS_RDIF_SIDEBAND) | \
(M_RL_FECSS_RDIF_SWIZZL_PIN0_BIT0_CYL1 << M_RL_FECSS_RDIF_SWIZZL_MODE));*/
ptrOpenCfg->fecRDIFCtrlCmd.c_LaneRateCfg = 0U;
ptrOpenCfg->fecRDIFCtrlCmd.c_TestPatternEn = M_RL_FECSS_TEST_PATRN_DIS;
ptrOpenCfg->fecRDIFCtrlCmd.h_TestPatrnInitCode[0] = 20; //0x1
ptrOpenCfg->fecRDIFCtrlCmd.h_TestPatrnInitCode[1] = 20; //0x2
ptrOpenCfg->fecRDIFCtrlCmd.h_TestPatrnInitCode[2] = 20; //0x3
ptrOpenCfg->fecRDIFCtrlCmd.h_TestPatrnIncrCode[0] = 20; //0x1
ptrOpenCfg->fecRDIFCtrlCmd.h_TestPatrnIncrCode[1] = 20; //0x5
ptrOpenCfg->fecRDIFCtrlCmd.h_TestPatrnIncrCode[2] = 20; //0xA
}

Thanks zigang. I will try this . 

Can you point me to the doc that contains ADC data format captured using mmWave L SDK 5.4 and DCA_CLI tools  ?