AWR2944: Data capture and format

Shawn Li(Radar)

Prodigy 625 points

Part Number: AWR2944

Hi team,

Do we have some materials of raw data captured by 2944? Like data format and etc.

Regards,

Shawn

4 months ago

0 Ajay Narayan 4 months ago

TI__Mastermind 19625 points

Hi Shawn,

Do you mean the Raw ADC data captured using DCA1000 or pointcloud data from demo?

Regards,

Ajay

0 Shawn Li(Radar) 4 months ago in reply to Ajay Narayan

TI__Prodigy 625 points

The raw data captured by DCA1000

0 Shawn Li(Radar) 4 months ago in reply to Shawn Li(Radar)

TI__Prodigy 625 points

Hi Ajay,

Any update? I believe this problem should has been solved when local team is promoting 2944 to customer, please help provide the related information to me asap.

Regards,

Shawn

+1 Ajay Narayan 4 months ago in reply to Shawn Li(Radar)

TI__Mastermind 19625 points

Hi Shawn,

It is documented in the documentation of mmwavestudio at "C:\ti\mmwave_studio_03_01_01_00\docs\mmwave_studio_user_guide.pdf"

Regards,

Ajay

0 Shawn Li(Radar) 4 months ago in reply to Ajay Narayan

TI__Prodigy 625 points

Hi Ajay,

I find it, it's at the end of the doc. Thanks.

Regards,

Shawn

0 Shawn Li(Radar) 4 months ago in reply to Ajay Narayan

TI__Prodigy 625 points

Hi Ajay,

Customer doesn't have a DCA1000, they are using the network port to transfer adc data. So what about the data format that stored in ADC buffer?

Regards,

Shawn

+1 Ajay Narayan 4 months ago in reply to Shawn Li(Radar)

TI__Mastermind 19625 points

Hi Shawn,

ADC buffer storage is dependent on if it is in interleaved or non-interleaved mode.

Refer to https://www.ti.com/lit/an/swra555a/swra555a.pdf

In AWR2944 it is just real only data.

Regards,

Ajay

Sensors

Sensors forum

AWR2944: Data capture and format