AWR2944EVM: awr2944EVM Flashing via ftdi

Serhat Arslan

Part Number: AWR2944EVM
Other Parts Discussed in Thread: UNIFLASH

Hello,

I am following Automotive Visualizer User Guide. (https://dev.ti.com/tirex/explore/node?a=VLyFKFf__4.12.0&node=A__AOI-FzWeBo96BncHR1pzwA__radar_toolbox__1AslXXD__LATEST)

I want to flash awr2944evm using ftdi port. How can I do this? I found something about this, but this information is not enough for me. I would like to express my gratitude in advance for all your help.

Best Regards,

over 1 year ago

0 James Murdock65 over 1 year ago

TI__Expert 3411 points

Hi Serhat,

As mentioned in the instructions, you can use Uniflash to program the board:

UNIFLASH Software programming tool | TI.com

Regards,

James

0 Serhat Arslan over 1 year ago in reply to James Murdock65

Intellectual 330 points

Hello, what I'm curious about and want to learn is, is it possible to flash in the uniflash program using FTDI ports? As a result of my experiments, I saw that it did not work.

In general I am not interested in flashing using the xds110 port, specifically I have problems with the ftdi ports

0 James Murdock65 over 1 year ago in reply to Serhat Arslan

TI__Expert 3411 points

Hello Serhat,

could you check the instructions in the mmwave_mcuplus_sdk_user guide? C:/ti/mmwave_mcuplus_sdk_04_06_00_01/mmwave_mcuplus_sdk_04_06_00_01/docs/mmwave_mcuplus_sdk_user_guide.pdf

Regards,

James

0 Serhat Arslan over 1 year ago in reply to James Murdock65

Intellectual 330 points

Hello James,

I reviewed the document you sent, but I did not find any useful information about my question and situation. Can you give information about flashing using ftdi ports ?

Best Regards,

0 James Murdock65 over 1 year ago in reply to Serhat Arslan

TI__Expert 3411 points

Hello Serhat,

Those instructions are using the FTDI ports on the EVM.

Regards,

James

Sensors

Sensors forum

AWR2944EVM: awr2944EVM Flashing via ftdi