AWR1642BOOST: Custom GUI

Josh Millare

Part Number: AWR1642BOOST
Other Parts Discussed in Thread: AWR1642

Tool/software:

Hello. I'm creating a custom GUI for my AWR1642 using GUI Composer. The YT Video isn't really tailored for the Radar Sensors.

First, what do I put in here? Is it a .bin file?

How about in here? I chose USB UART.

There is really no output.c file that I can use for my radar.

Also, the GUI Composer seems laggy.

over 1 year ago

0 Cesar over 1 year ago

TI__Guru*** 147934 points

Hi,

If you have access to Matlab it is probably easier to use Matlab.

The SRR demo that is provided in the Radar Toolbox has a matlab GUI that you can modify.

Thank you

Cesar

0 Josh Millare over 1 year ago in reply to Cesar

Prodigy 215 points

Hello Good Day, I attempted to modify it but I really don't know how to modify it or where to start modifying it. It isn't like the App Builder where you put elements into the interface. Are there any examples/guides on how to modify an existing matlab GUI?

0 Cesar over 1 year ago in reply to Josh Millare

TI__Guru*** 147934 points

HI,

The easiest way to understand how the gui works is to

flash the demo binaries on the EVM
Power on the EVM
Open the matlab gui file in Matlab and set a breakpoint in the matlab file to understand the gui

thank you

Cesar

Sensors

Sensors forum

AWR1642BOOST: Custom GUI