• State
  • Locked Locked
  • Replies 3 replies
  • Subscribers 31 subscribers
  • Views 134 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWRL6432BOOST: how to generate transmission wave from only Tx1 or only TX2

Atsuyuki Oyamada
Prodigy 100 points
Part Number: AWRL6432BOOST
Other Parts Discussed in Thread: MMWAVE-L-SDK

Tool/software:

Hi, teams.

i want to evaluate characteristics of transmitted waves.

Could you teach me how to set up the following

○how to generate transmission wave from only Tx1 

○how to generate transmission wave from  only TX2

○how to generate transmission wave from both Tx1 and TX2 simultaneously at same phase

○how to generate transmission wave from both Tx1 and TX2 simultaneously at opposite phase

Now I am using mmwave-L-SDK or mmwavestudio.

  • 0
    TI__Intellectual 2225 points

    Hi,

    If you are using mmwave-L-SDK, please refer to the MMWAVE_L_SDK_05_04_00_01/docs/api_guide_xwrL64xx/MOTION_AND_PRESENCE_DETECTION_DEMO.html file. Search for "CLI Interface", Here you will be able to find parameters you need to modify to get the required Txs operation.

    Thanks,
    Kundan

  • 0 in reply to Kundan Somala
    Prodigy 100 points

    Hi,

    I tried that with MMWAVE_L_SDK_05_03_00_02.
    But I could'nt generate transmission wave from only Tx1 or Tx2.

    After that, I tried that with mmwave_studio_04_01_00_06.
    I could generate transmission wave from only Tx1 or Tx2.

    Thank you for your advice.

    Could you tell me
    ①how to generate transmission wave from both Tx1 and TX2 simultaneously at same phase
    ②how to generate transmission wave from both Tx1 and TX2 simultaneously at opposite phase

    Thanks,

    Oyamada

  • 0 in reply to Atsuyuki Oyamada
    TI__Intellectual 2225 points

    Hi Oyamada,

    You can enable BPM mode in studio. This will essentially allows simultaneous transmission of Two Txs with 0,180 phase difference.

    Thanks,
    Kundan