AWR2243: Debug ports - RS232(N5/N6) and HS_DEBUG1/2(N14/N15, M14/M15)

Hirotaka Matsumoto

Part Number: AWR2243

Tool/software:

Hi all

Would you mind if we ask AWR2243

AWS2243 has Debug ports - RS232(N5/N6) and HS_DEBUG1/2(N14/N15, M14/M15) like as followings;

Our customer intends to use these debug.
Could you share us how to use for debug?
If you have document or application note, please share us also.

Kind regards,

Hirotaka Matsumoto

over 1 year ago

0 Hirotaka Matsumoto over 1 year ago

Guru 27585 points

Hi all

We guess that your days are so busy.
However could you share us your reply?

Kind regards,

Hirotaka Matsumoto

0 shruti gupta over 1 year ago in reply to Hirotaka Matsumoto

TI__Genius 11110 points

Hi Hirotaka,

You can refer to the following thread -

https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/988350/awr2243-the-purpose-and-usage-of-hs_debug1-2

Regards,

Shruti

0 Hirotaka Matsumoto over 1 year ago in reply to shruti gupta

Guru 27585 points

Shruti san

OK, we got that the HS_DEBUG lines are not part of the CSI interface, but a different high speed interface i.e. LVDS.
It is used for another LVDS transmission port.

By the way, is RS232(N5/N6) used for debug port?
And if you have some document or application for these, could you share us?

Kind regards,

Hirotaka Matsumoto

+1 shruti gupta over 1 year ago in reply to Hirotaka Matsumoto

TI__Genius 11110 points

Hi Hirotaka,

these RS232 pins are generally used to program the external flash. We don't have any application note for the same.

Regards,

Shruti

Sensors

Sensors forum

AWR2243: Debug ports - RS232(N5/N6) and HS_DEBUG1/2(N14/N15, M14/M15)