AWR2243: config Tx Beamforming mode

Jonathan Navor

Part Number: AWR2243

Tool/software:

Hi Experts,

Good day! Posting this on behalf of the customer.

I had a problem with the AWR2243
when i follow mmWave Studio Cascade User's guide.pdf
I try to config Tx Beamforming mode
I load run the Cascade_Basic_Configuration.lua successfully
but got an error when I try to run the matlab script
mmwave studio's output show like this

this is the matlab script I am running

following the pdf Open "cascade_TxBF_dataCapture" part and got this error

I've checked phaseShiftCalibfile, phaseMismatchCalibfile, RSTD DLL Path . All the file route is correct

I ran the Cascade_Configuration_MIMO.lua script and it was nothing wrong

over 1 year ago

0 Sami Mardini over 1 year ago

TI__Expert 4160 points

Hi Jonathan,

Sorry for the delay. Someone from our team will back with you.

Regards,

Sami

0 Aydin Kiasat over 1 year ago

TI__Expert 5461 points

Hi Jonathan,

Please ask the customer to provide the LOG file from the studio so we check at which step it failed.
Please ask the customer to manually connect rather than running the Lua script (refer to the mmWave studio cascode for guidance) and let us know whether they're able to Load BSS/MSS, Connect SPI, and RF power up.

Regards,

Aydin

0 Jonathan Navor over 1 year ago in reply to Aydin Kiasat

TI__Genius 9475 points

Hi Aydin,

I'll get back to you for more details. Thank you.

Regards,

Jonathan

0 Aydin Kiasat over 1 year ago in reply to Jonathan Navor

TI__Expert 5461 points

Sure, let us know when you have the details.

Regards,

Aydin

Sensors

Sensors forum

AWR2243: config Tx Beamforming mode