IWRL6432BOOST: How to start with programming mmWave sensor?

vasikaran s

Part Number: IWRL6432BOOST

Tool/software:

I have started working with the sensor, I thought of transmitting a chirp signal, but I could not find APIs related to FECSS configuration kindly help out

over 1 year ago

0 Nathan Block over 1 year ago

TI__Mastermind 37805 points

Hi,

You can use the docs in the firmware/ folder of the MMWAVE L SDK, but this is not the easiest way. I would recommend modifying the configuration file first if you're just getting set up with the device. Is there something you want to do that the config files can't accomplish?

Best,

Nate

0 vasikaran s over 1 year ago in reply to Nathan Block

Prodigy 140 points

I am learning the working of FMCW radar systems, so I thought of reading the FECSS where all front-end operation is done.

0 Nathan Block over 1 year ago in reply to vasikaran s

TI__Mastermind 37805 points

Hi,

That's great. If you have any further questions in development feel free to open another thread. I am closing this one now since there are no follow up questions.

Best

Nate

Sensors

Sensors forum

IWRL6432BOOST: How to start with programming mmWave sensor?