IWRL1432: Is it possible to enable RX channel but disable all TX channel to measure the background noise?

Allen35065

Part Number: IWRL1432

Tool/software:

Hi expert,

Customer want to get the background noise so they want to disable both TX channels but enable RX channels in the chirp setting. Is IWRL1432 support this mode? Thank you.

Regards,

Allen

4 months ago

0 zigang Yang 4 months ago

TI__Mastermind 36515 points

Hi, Allen:

From the SDK L users guide (file:///C:/ti/MMWAVE_L_SDK_05_04_00_01/docs/api_guide_xwrL64xx/MMWAVE_DEMO.html#autotoc_md866) , you can see the channelCfg does not support the option of disable all the TX channel. Which means disable all TX is not supported at SDK L demo level.

Best,

Zigang

0 zigang Yang 4 months ago in reply to zigang Yang

TI__Mastermind 36515 points

You can consider to set maximum TX back-off in case that helps.

Best,

Zigang

Sensors

Sensors forum

IWRL1432: Is it possible to enable RX channel but disable all TX channel to measure the background noise?