Tool/software:
Hi.
I was collecting raw data using the radar, and even when I turned the Radar FTDI on and off using the USB hub, the AR-DevPack port remained in the Device Manager. Despite this, I had no issues running mmWave and collecting raw data. Notably, the FTDI connectivity status in mmwave connection section showed as "connected." (Despite refresh) Can I trust the raw data I obtained in this situation?
I will attach the screenshot, and to clarify: when the Radar FTDI was turned on, the AR-DevPack was recognized, but even after turning it off, the AR-DevPack still remained in the ports list. Despite this, I was able to successfully obtain raw data.
