MMWCAS-DSP-EVM: How to Capture Real time Data with MMWCAS-DSP-EVM and MMWCAS-RF-EVM

[Duplicate thread]

Hello,

The MMWCAS-RF-EVM and MMWCAS-DSP-EVM are together used to capture data on the PC and post process it on the PC.

Could you please refer to the below document for real time capture: PROCESSOR_SDK_RADAR_03_08_00_00/vision_sdk/docs/FeatureSpecificUserGuides/VisionSDK_UserGuide_Cascade_Radar_Data_Acquisition_Tool_Usecase.pdf

Userguide should also be available on ti.com

Hope this helps. 

E. Shareef

Senal,

Below is an FAQ page for all questions on the capture of data through the MMWCAS-RF-EVM.

https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/925288/faq-mmwcas-rf-evm-cascade-board-related-queries

You will find training videos and instructions on how to do a capture here. 

Thanks,

E. Shareef