• State
  • Locked Locked
  • Replies 5 replies
  • Subscribers 31 subscribers
  • Views 123 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DCA1000EVM: Radar Inerface Error

Dhiraj Sangwan
Prodigy 80 points
Part Number: DCA1000EVM
Other Parts Discussed in Thread: AWR2944EVM,

Tool/software:

I have connected AWR2944EVM and DCA1000EVM with all the proper connections.


Initially, the SPI connection of AWR2944EVM was properly established with the mmWave studio and access the raw data. Then, I disconnected it and interfaced AWR2944EVM with the demo visualizer to get the range plot. Then, when I again tried to interface the AWR2944EVM with mmWave studio, it showed me a "Radar Interface Error" during the SPI connectivity.

I don't understand why it is giving me that error.

The snapshot of the window is available below. 

Regards, 

Dhiraj