• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 2031 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DCA1000EVM: Problema con el software mmWaveStudio

Jean Cucchi
Prodigy 10 points
Part Number: DCA1000EVM
Other Parts Discussed in Thread: IWR1642BOOST

Tool/software:

Quiero hacer la demostracion realizada en uno de los videospara utilizar el DCA1000Evm con un IWR1642boost, adjunto las imagenes y bueno queria saber en caso quiero utlizarlo que configuracion por defecto debo hacer a los SW1,SW2 y SW3 del DCA1000EVM.
Realizo los pasos pero cuando estoy configurarndo "Static Config", surge este problema. 
Estoy utilizando un DCa1000EVM y IWR1642Boost, con un cargador de 5v/2A, se que recomiendan un cargador con mas amperaje pero por ahora tengo este. ¿Cual seria la solucion?¿algun correo para poder contactamr o numero?

  • 0
    Prodigy 10 points

    I want to do the demonstration done in one of the videos to use the DCA1000EVM with an IWR1642boost, I attach the images and well I wanted to know in case I want to use it, what default configuration I should do to SW1, SW2 and SW3 of the DCA1000EVM.
    I follow the steps but when I am configuring "Static Config", this problem arises.
    I am using a DCa1000EVM and IWR1642Boost, with a 5v/2A charger, I know that they recommend a charger with more amperage but for now I have this one. What would be the solution? Any email or number to contact me?

  • 0 in reply to Jean Cucchi
    TI__Genius 17877 points

    Hello,

    Have you tried running the LUA Script found in C:\ti\mmwave_studio_02_01_01_00\mmWaveStudio\Scripts? Use and run DataCaptureDemo_xWR.lua. Also we recommend also going over 2.5A to a 5V 3A charger. It's possible there is not enough current to allow configuration.

    Best Regards,

    Pedrhom