TMP9R00-SP: Evaluation module

Matth. B.

Part Number: TMP9R00-SP
Other Parts Discussed in Thread: TMP461, , TMP468EVM, TMP468

Tool/software:

Hello,

In order to evaluate if this component can be used in my application, I would like to use an evaluation kit but there is none, can I use the TMP461 one ?

Goal is just to ensure the compatibility with our remote IC sensor and check the performance.

Thanks

Best Regards

11 months ago

0 Meredith McKean 11 months ago

TI__Genius 9860 points

Hello Matth,

For TMP9R00-SP EVM, I would use the TMP468EVM with the TMP468 GUI. This would allow you to test the functionality of the remote junctions as well. You will need to exchange the middle section on the EVM with the TMP9R00-SP unit and reconnect the two other sections.

Best Regards,

Meredith McKean

0 Matth. B. 11 months ago in reply to Meredith McKean

Expert 1145 points

Hi Meredith,

Today, I don't have any TMP9R00-SP in hand. I'm searching an equivalent reference to confirm the compatibilty with my IC.

Is the TMP461 or TMP468 similar with TMP9R00-SP ? I.e, if TMP461 is compatible with my IC, will the TMP9R00-SP with also ?

Regards

0 Ren Schackmann 11 months ago in reply to Matth. B.

TI__Mastermind 43815 points

Yes, TMP9R00-SP is software compatible with TMP468.

thanks,

ren

0 Matth. B. 11 months ago in reply to Ren Schackmann

Expert 1145 points

My question is also about the hardware part, current source, ADC..

I don't have any information about the sensor used in my IC (PNP, NPN, other) nor the non ideality factor so I would like to be sure that my IC is compatible with TMP9R00-SP.

So is hardware interface between TMP9R00-SP and TMP461 or TMP468 the same ?

Regards

+1 Meredith McKean 11 months ago in reply to Matth. B.

TI__Genius 9860 points

Hello Matth,

TMP9R00-SP hardware interface between TMP468 are the same. TMP461 is different.

Best Regards,

Meredith McKean

Sensors

Sensors forum

TMP9R00-SP: Evaluation module