• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 227 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR6843ISK: 6843ISK

Larry Koudele
Intellectual 310 points
Part Number: IWR6843ISK

Tool/software:

I have been using the 6843ISK and DCA1000 together for a while.   I have been doing my own data analysis from the binary files generated and sent out on the ethernet cable.  Mostly I do my own FFTs and averaging using Matlab.   Going forward, is there a way I can do this signal processing without the DCA1000?   For a product, will I need a DCA1000 and PC or can I simplify the system?

Regards,

Larry

  • 0
    TI__Mastermind 23177 points

    Hello Larry,

    You would need to edit 6843 code, but as an example 6432 we can do raw data capture over SPI using an FTDI cable and no DCA1000. This approach however is also suboptimal as you will be limited by the SPI data transfer speed limits. That said, for what reason would the final product require a DCA1000? The purpose of the tool is to write and validate processing algorithms to then implement as C code to run on-chip.

    Best Regards,

    Pedrhom