Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 32 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

AWR2944: HWA Zero Insertion

yu zhu
Prodigy 20 points
Part Number: AWR2944

Tool/software:

Hello：

Can HWA be configured separately to insert zeros, I used the HWA course inside the SDK to configure the insertion of the zero parameter set separately, and found that the first few sampling points yielded incorrect results.

Thank you!!

  • 0
    TI__Genius 9580 points

    Hi Yu Zhu,

    Please check "C:\ti\mmwave_mcuplus_sdk_04_06_01_02\mmwave_mcuplus_sdk_04_06_01_02\ti\datapath\dpu\dopplerprocDDMA\src\dopplerprochwaDDMA.c" for zero insertion implementation. 

    The above screenshot is from the TRM describing about the readback behavior. Are you observing similar behavior?

    Regards,

    Samhitha