AWR1843AOP: Adding Ethernet support with AWR1843AOP

Jack

Part Number: AWR1843AOP
Other Parts Discussed in Thread: AWR1843

Tool/software:

Hi AWR1843AOP Champ !

I would like to know if it is possible to have Ethernet communication based on AWR1843.

If it is possible, I would also appreciate a rough interface configuration of which ICs should be added.

May I also recommend you to take a look at the DCA1000 EVK and try to get the 1843 LVDS to Ethernet circuit?

Thanks.

Regards,

Jack

0 Ajay Narayan 9 months ago

Hi Jack,

Is the end use case to have ethernet interface for data collection setup or you also want it in the end product design.

Regards,

Ajay

0 Jack 9 months ago in reply to Ajay Narayan

Hi Ajay

It’s needed for end production design.

Thanks

0 Ajay Narayan 8 months ago in reply to Jack

Hi Jack,

DCA1000 is not meant for production but only for data collection and development.

AWR1843 does not support Ethernet interface.

One option could be using a SPI to Ethernet transceiver PHY and use the SPI interface of AWR1843. But speed would be limited.

Regards,

Ajay

Sensors forum