• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 170 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

HDC2080: Chip soldering considerations

Yuxi Liu(Tony)
Expert 3220 points
Part Number: HDC2080
Other Parts Discussed in Thread: HDC2021

Tool/software:

Hi TIer

Could you give me suggestion that Can I use a hot air gun when I hand weld this chip, because the package is special, do we have welding advice? 

Thank you very much.

And I need 10 pcs sample , I see their no sample can get on Ti.com , only can get it on ZS order, Is this right?

  • 0
    TI__Genius 12415 points

    Hi Yuxi,

    We typically don't recommend user's solder the HDC devices through means other than reflow, but yes this can be done. I would recommend using the HDC2021 in this case. It is functionally identical to the HDC2080, but has a removeable tape cover to keep dust and debris out of the sensor area during the assembly process.

    Regards

    -Alex Thompson