• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 366 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMAG5253: Propagation delay time

Hideaki Yokoshima
Prodigy 20 points

Part Number: TMAG5253
Other Parts Discussed in Thread: DRV5055,

Tool/software:

The DRV5055 datasheet specifies "td: Propagation delay time (From change in B to change in OUT)," but the TMAG5253 datasheet does not include this parameter.
When I measured the propagation delay time (td) of the TMAG5253 sample I have, it was approximately 12 µs.
If there is a specification available, even just the typical value, please let me know.

  • 0
    TI__Mastermind 25420 points

    Yokoshima-san,

    Thank you for reaching out on E2E with your question.  I am not aware of any characterization data for this parameter which is available. I apologize for the inconvenience this may cause you.  It is likely that the data gathered relative to your own system will be the most useful given the inclusion of other system level delays and your magnet motion.  

    Thanks,

    Scott