IWR6843ISK-ODS: How to connect the pin of WR6843ISK-ODS to xds 110?

Daniel Cheng1

Mastermind 6065 points

Part Number: IWR6843ISK-ODS
Other Parts Discussed in Thread: MMWAVEICBOOST, IWR6843, LP-XDS110, TMDSEMU110-U

Tool/software:

Hi Expert,

The IWR6843ISK-ODS development board does not pull out JTAG independently.

The document states that the JTAG PIN is included in the 60pin pin of the MMWAVEICBOOST Board.

How to connect the pin of WR6843ISK-ODS to xds 110?

Thanks

Daniel

14 days ago

0 Ankit Mohanty 13 days ago

TI__Expert 7920 points

Hi Daniel,

The JTAG pins for IWR6843 device for the IWR6843ISK-ODS board have been routed to connector J1 of MMWAVEICBOOST connector. MMWAVEICBOOST has on-board XDS110; the IWR6843ISK-ODS board when connected to MMWAVEICBOOST board through J1 the below shown JTAG signals shall be connected to XDS110.