AWRL1432BOOST: reboot function

Liam

Part Number: AWRL1432BOOST

Tool/software:

Hi experts,
If I want to realize software reboot function, is there any other mmwave related function (for example MMWave_deinit) should be called before handleWdtRst function?

Best regards
Liam

7 months ago

+1 Kristien Everett 7 months ago

TI__Genius 12986 points

Hey Liam,

Thanks for reaching out regarding the watchdog. You should not need to call any other mmWave related functions before handleWdtRst. However, you will need to make the front-end is powered on beforehand - i.e., the device cannot be in a low power deep sleep.

If you would like to learn more about the booting sequence and resets for xWRLx432 devices, I would recommend taking a read through the app note below. Let me know if you have any other questions.

https://www.ti.com/lit/ug/swru622a/swru622a.pdf

Regards,

Kristien

0 Liam 6 months ago in reply to Kristien Everett

Prodigy 160 points

Hi Kristien,
Thanks for your reply.

We have successfully runned watchdog.

Best regards
Liam

0 Kristien Everett 6 months ago in reply to Liam

TI__Genius 12986 points

Perfect!

I'm glad you all were able to resolve this issue. I will close out this thread now, but if you have any other questions, feel free to open up a new thread.

Cheers,

Kristien

Sensors

Sensors forum

AWRL1432BOOST: reboot function