LDC-DESIGN-TOOLS: Coil Design Wizard CAD export is not working

Ilia Oblomkov

Prodigy 10 points

Part Number: LDC-DESIGN-TOOLS

Tool/software:

Hello,

Could you please check the following issue on TI Webench Coil Designer:

URL: webench.ti.com/.../

Issue:

When trying to export any coil design to a PCB project, the export fails with the following error message all time:

CAD export was not completed successfully.

Please check your connection or retry your inputs to proceed.

8 months ago

0 Shaheen Makandar 8 months ago

TI__Expert 3160 points

Hi Ilia,

Thanks for the above post, We have reported this issue to concerned team, will update once we get response from the team.

Sorry for the inconvenience.

Regards

Shaheen

+1 Sateesh Goudappanavar 8 months ago in reply to Shaheen Makandar

TI__Intellectual 2380 points

Hi Ilia,

The above reported issue is resolved. Kindly verify and let us know if you are able to Export designs.

Thank you

Best Regards,
Sateesh A G

0 Blake Brasher 7 months ago in reply to Sateesh Goudappanavar

Prodigy 10 points

Hello, I'm having the same issue yesterday and today. I was able to export designs last week, but have had no luck getting it to work this week. I've had colleagues try as well without any luck. Thank you!

0 Umayal Ramanathan 7 months ago in reply to Blake Brasher

TI__Expert 5890 points

Hi Blake,

We are able to replicate the issue. We are working to identify the root cause for this. We would be able to get back with more details by end of this week.

Regards,

Umayal

0 ? ? 7 months ago

Prodigy 10 points

Hello, I have the same issue today.

0 Umayal Ramanathan 7 months ago in reply to ? ?

TI__Expert 5890 points

Hi User,

This is a generic issue observed over most of the parts and it has been reported to the relevant team. Our team is actively working on a priority basis to resolve it.

However, the resolution may take longer than usual, and we appreciate your patience and cooperation in the meantime.

We will update you as soon as the issue is resolved.

Thank you for your understanding.

Best Regards,
Umayal

0 Umayal Ramanathan 7 months ago in reply to Umayal Ramanathan

TI__Expert 5890 points

Hi User,

The issue observed with respect to the coil design exports is now resolved. In case the issue persist yet kindly try on different browsers and revert back to us for any further queries.

Thanks and Regards,

Umayal

Sensors

Sensors forum

LDC-DESIGN-TOOLS: Coil Design Wizard CAD export is not working

CAD export was not completed successfully.