IWRL6432AOPEVM: AutomatedDoorApplication

Shuo Hu

Part Number: IWRL6432AOPEVM
Other Parts Discussed in Thread: IWRL6843, , IWRL6432AOP

Tool/software:

Dear Engineer,

The board I have is IWRL6432AOPEVM, I have tested motion_presence_detection demo, only tracking objects and it's working well. Now I am wondering if there is any demo I can use to achieve automated door control management by tuning some important parameters? I saw some videos like opening the door automatically with IWRL6843.

Best regards,

Shuo

6 months ago

0 Abhishek Karkisaval 6 months ago

TI__Genius 11730 points

Thanks for your query. Please allow us a couple of days to respond

Regards

0 Santosh Krishnan 6 months ago in reply to Abhishek Karkisaval

TI__Mastermind 19470 points

Hello.

You can use the same demo for the automated doors and gates application using the doors and gates configs provided in the toolbox.

Sincerely,

Santosh

0 Shuo Hu 5 months ago in reply to Santosh Krishnan

Prodigy 100 points

Hi Santosh

I flashed the automated door image to the board IWRL6432AOP, and when I open matlab visualizer(I am following this guide "Automated Doors User Guide") after I input the anlge of Antenna, the terminal flashed out, shows the error "cannot find the configuration file", so I couldn't run the demo.

Could you help me with these probelm, I don't know how to do it now..

Best regards,

Shuo

+1 Santosh Krishnan 5 months ago in reply to Shuo Hu

TI__Mastermind 19470 points

Hello.

I meant that you can use the motion and presence demo for the automated doors and gates application using specific configurations that we have for the doors and gates usecase. In addition, you will have to use the industrial visualizer as the matlab visualizer is not intended for the 6432 device or for the motion and presence demo.

Sincerely,

Santosh

Sensors

Sensors forum

IWRL6432AOPEVM: AutomatedDoorApplication