• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 142 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

IWR6843ISK: Need Configuration Commands detailed definition

Larry Koudele
Intellectual 310 points
Part Number: IWR6843ISK
Other Parts Discussed in Thread: IWR6843

Tool/software:

The IWR6843ISK is always sent config commands to setup the radar as desired.  When I look at a config file, it is a list of 

Config Names, where each name has a list of values horizontally that are the config values for that name.  Where do I find 

a document to decode what those values mean?

Regards,

larry 

  • 0
    TI__Genius 11900 points

    Hi Larry,

    You can find the definitions of the CLI used in the configuration file at the below location

    mmwave_sdk_03_06_02_00-LTS\docs\mmwave_sdk_user_guide.pdf

    If you are looking for the CLI specific to 3D people tracking demo, then you can find the details at the below location

    radar_toolbox_2_30_00_12\source\ti\examples\Industrial_and_Personal_Electronics\People_Tracking\docs\IWR6843_People_Tracking_PDFs\3D_people_tracking_detection_layer_tuning_guide.pdf

    Regards