• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 87 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

AWR6843: AWR6843

AWR6843: Support Requested

Rashid Sowah
Prodigy 40 points
Part Number: AWR6843
Other Parts Discussed in Thread: UNIFLASH

Tool/software:

I am working on the vital signs lab , 

1. what bin. files should i use to flash the board using the UniFlash tool.

2. How do i set the the switches to flashing mode and functional mode. I checked online and i was advised to set the (on off on on off off) for flashing and (off off on on off off ) for functional mode.

3. i am  unable to connect RS232 operations even though i am using the right Com Port using mmWave Studio. Please find below the error response i receive.

[17:08:19] [RadarAPI]: Error: Connection failed: Calling ConnectTarget returned 3
[17:08:19] 

I will be glad if someone can support me.

  • 0
    TI__Mastermind 19450 points

    Hello.

    Rashid Sowah said:
    1. what bin. files should i use to flash the board using the UniFlash tool.

    You should download the toolbox and use the binaries from the Vital Signs with People Tracking demo.

    Rashid Sowah said:
    2. How do i set the the switches to flashing mode and functional mode. I checked online and i was advised to set the (on off on on off off) for flashing and (off off on on off off ) for functional mode.

    Please refer to the EVM setup operational guide on radar toolbox.

    Rashid Sowah said:
    3. i am  unable to connect RS232 operations even though i am using the right Com Port using mmWave Studio. Please find below the error response i receive.

    Do you have any other terminal or visualizer open that is connected to that COM port?  Have you tried connecting to the COM port using a serial terminal?  Are you in functional mode when trying to connect to the device?

    Sincerely,

    Santosh