• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 124 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AWR2944EVM: advChirpConfig using mmwave studio

Peng Zheng
Intellectual 280 points
Part Number: AWR2944EVM
Other Parts Discussed in Thread: AWR2944

Tool/software:

Hi,

I want to use mmwave studio to config complex waveform, i need to use Delta and LUT dither.
If the waveform is show in this figure(from mmwave_dfp_user_guide), what shoule i do in mmwave studio at advChirpConfig Tab?


  • 0
    TI__Expert 4200 points

    Hi,

    You will be able to find detailed description of these fields in the mmWave-Radar-Interface-Control.pdf document. For AWR2944, this document is present inside the mmwave_mcuplus_sdk_xx_xx_xx_xx/mmwave_dfp_xx_xx_xx_xx/docs directory after you have installed the SDK. You can search for 'AWR_ADVANCE_CHIRP_CONF_SB' in the document.

    When you send any command using the mmwave studio, it gets translated into a supported API command. All supported API commands as described in the Interface control document can also be sent directly to the mmwave device without using the studio GUI. Let me know if there are any questions related to these.

    Shailesh