AWR1843AOP: Crystal oscillator not generating 40 MHz signal

Hello,

This looks like a repeat of an existing thread. We gave some recommendations to try and share the results. Please do the requested tests and share the results in the existing thread.

https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/1511825/awr1843aop-custom-board-crystal-not-working

Regards,

Adrian 

Hi TI

Please find the attached excel sheet with updated testing results. 

0753.HardwareDesignChecklist_V0p1_xWR1843AoP_filled 1.xlsx


Check the above attached sheet and suggest the solution.


With regards,
Rashmika

Hello,

Sorry for the delay. It looks like there are two threads on this same topic. I would request to move the discussion to the other thread and I will close this thread.

https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/1516539/awr1843aop-in-the-custom-board-what-are-the-required-steps-to-generate-the-40-mhz-clock-from-cryastal

Regards,

Adrian

Please give reply as soon as possible

Hello,

This has been assigned to industrial apps engineer on the other thread, they will not be responding to this thread. Please do not respond to this thread and continue the discussion in the other thread. 

Regards,

Adrian

Ok. Please provide the solution in other thread.