• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 82 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMAG5231: quiescent current

Keith Keller
Expert 7230 points
Part Number: TMAG5231

Tool/software:

Hello,

We're looking at the TMAG5231A2C device with 1.8mT and 20Hz to detect a button push.

We're wondering if the 2uA quiescent current apply to the output being latch high or low?  Same current draw for both states?

Thank you, Keith

  • 0
    TI__Mastermind 21120 points

    Keith,

    The output is a push-pull type, so the current draw should be roughly the same under both high and low output states.  I would only expect to see variation if there were some sort of loading on the output pin causing it to source or sink current.

    Thanks,

    Scott