IWRL6432AOPEVM: Geting started with IWRL6432AOPEVM and CCS 20

Fleishman Fleishman

Part Number: IWRL6432AOPEVM

Tool/software:

Hi,

Where I can fined "Getting start " document to "Build a Hello World example" . With IWRL6432AOPEVM and CCS Version: 20.2.0.12__1.8.0 ?

Currently I start with C:\ti\MMWAVE_L_SDK_05_05_03_00\README_FIRST_xWRL6432.html but in this manual step 2,3,4 refer to old CCS and different EVB.

Do you have more relevant manual ?

Thanks in advance

Yaki

1 month ago

0 Saransh Gautam 1 month ago

TI__Prodigy 440 points

Hello Yaki!

As mentioned in the "Download, Install and Setup CCS" section under "Getting Started" Tab of C:\ti\MMWAVE_L_SDK_05_05_03_00\README_FIRST_xWRL6432.html, you can install CCS 12.7.1 from link: https://www.ti.com/tool/CCSTUDIO.

The development of MMWAVE_L_SDK_05_05_03_00 was done with this CCS 12.7.1 version, hence you will find the docs inside SDK referring to this older version only.

However, if you require, then you can find Getting Started docs for CCS version 20.2.0 here: https://software-dl.ti.com/ccs/esd/documents/users_guide_ccs_20.2.0/index.html

0 Fleishman Fleishman 1 month ago in reply to Saransh Gautam

Intellectual 340 points

Thanks for your answer .

Do you have the configuration of IWRL6432AOPEVM (connection and switch setting ) to work with this user guide ?

Is there any document that example working with CCS version 20.2.0 and radar EVB ?

In additional I didn't find the CCS 12.7.1 in the link you sent .

Thanks

Yaki

+1 Saransh Gautam 1 month ago in reply to Fleishman Fleishman

TI__Prodigy 440 points

Hello Yaki!

1. For CCS 12.7.1, you can use this link: https://www.ti.com/tool/download/CCSTUDIO/12.7.1

2. For CCS 20.2.0, you can follow these steps to import, build and run an SDK example on device : https://software-dl.ti.com/ccs/esd/documents/users_guide_ccs_20.2.0/index_getting-started.html

Additionally, you can refer to these docs as well:
dev.ti.com/.../node

3. If you want to use CCS to load and run SDK examples, you can use these switch settings on your 6432AOP device:

0 Fleishman Fleishman 1 month ago in reply to Saransh Gautam

Intellectual 340 points

Thanks

Sensors

Sensors forum

IWRL6432AOPEVM: Geting started with IWRL6432AOPEVM and CCS 20