MMWCAS-DSP-EVM: ADAS application

sathish kumar j

Part Number: MMWCAS-DSP-EVM
Other Parts Discussed in Thread: MMWCAS-RF-EVM, AWR2944, DCA1000EVM

Tool/software:

We are booting mmwcas-rf-evm,mmwcas-dsp-evm using mmwave_studio_cascade_user_guide.. How to use mmwcas-dsp-evm for real time application and program the dsp chip. kindly list software/ide to be used?

thanks in advance.

Regards,

J.Sathish Kumar

23 days ago

0 Cesar 23 days ago

TI__Guru*** 148804 points

Hi,

The MMWCAS kit is designed to be used for raw data capture.

There is no support for real time processing. For real time application, I recommend you use one of our programmable sensors such as AWR2944

Thank you
Cesar

0 sathish kumar j 22 days ago in reply to Cesar

Prodigy 110 points

How to program AWR2944 chip.

1. Any IDE is available from TI or directly we can program ARM and DSP.

2. Any hardware is required for programming this chip like dca1000evm.

thanks in advance.

0 Cesar 19 days ago in reply to sathish kumar j

TI__Guru*** 148804 points

Hi,

sathish kumar j said:
Any IDE is available from TI or directly we can program ARM and DSP.

Code Composer Studio IDE should be used to program the cores.

We provide an SDK and Demo that should help you start your development.

https://www.ti.com/tool/MMWAVE-MCUPLUS-SDK

Only the EVM and power supply are required to start development

https://www.ti.com/tool/AWR2944PEVM

The DCA1000 is needed only when raw data capture is performed

thank you

Cesar

Sensors

Sensors forum

MMWCAS-DSP-EVM: ADAS application