IWRL6432FSPEVM: Radio Test Results for TI Evaluation Board

Francois Godreau

Part Number: IWRL6432FSPEVM
Other Parts Discussed in Thread: IWRL6432BOOST

Tool/software:

Hello,

First of all, I would like to thank TI for making all the design files of this IWRL6432FSPEVM evaluation kit available. I developed a design inspired by this evaluation kit.

We are currently performing radio tests on our board to verify compliance with CE and FCC standards.
Would it be possible to obtain your radio test reports for this evaluation board, which is compliant with the Radio Equipment Directive (RED) and FCC standards, so that we can compare the results of our design with those of your evaluation kit?

Thank you for your support,

Francois

7 days ago

0 Swarnendu Chattopadhyay 6 days ago

TI__Expert 3630 points

Francois,

Thanks for reaching out. Please let us respond back in couple of days.

Thanks,

Swarnendu

0 Blake Kisshauer 6 days ago in reply to Swarnendu Chattopadhyay

TI__Expert 4280 points

Hi Francois!

The IWRL6432FSPEVM has not undergone FCC or RED/CE testing. However, the design does draw a lot from the IWRL6432BOOST. They both feature the same device and package, as well as many of the same components.

You can find the IWRL6432BOOST testing results here: https://dev.ti.com/tirex/explore/node?node=A__AJQEKiwEMZfvtfnDKUQZeQ__com.ti.mmwave_devtools__FUz-xrs__LATEST

I hope this helps!

Blake

0 Blake Kisshauer 6 days ago in reply to Blake Kisshauer

TI__Expert 4280 points

Hi Francois,

I see that you clicked "this did not resolve my question", but I don't see a follow up question. Do you have a follow up question on this topic?

Thanks!

Blake

0 Francois Godreau 6 days ago in reply to Blake Kisshauer

Prodigy 30 points

Hello,
I apologize; I thought the notification I received was related to the previous response. Since my design is very similar to the IWRL6432FSPEVM board, I would have preferred to use the reports from that kit directly.
I will review these reports and make the comparison in this case.
Thank you for your support.

Francois

0 Blake Kisshauer 6 days ago in reply to Francois Godreau

TI__Expert 4280 points

Francois,

Happy to help. I'm going to close this thread. If you have any follow up questions directly part of this subject, feel free to post them and it will re-open the thread. Otherwise, feel free to start a new thread for any other HW or SW questions you have!

Thanks!

Blake

Sensors

Sensors forum

IWRL6432FSPEVM: Radio Test Results for TI Evaluation Board