FDC1004EVM: SNOC028 - Linux driver

ramesh murthy

Part Number: FDC1004EVM

Tool/software:

We need to run this application in Raspberry Pi , do you have SNOC028 — Sensing Solutions EVM GUI Tool compatible for Linux. or Share some API commands to extract the data?

25 days ago

0 Eddie LaCost 25 days ago

TI__Mastermind 44140 points

Hello Ramesh,

We do not have a linux driver for this EVM, but you could use the same protocol that the GUI uses to communicate. See the post below where you will find a short document explaining the protocol.

https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/668052/linux-fdc1004evm-reading-sensor-from-a-raspberry-pi-linux?tisearch=e2e-sitesearch&keymatch=fdc1004EVM%25252520linux#

Sensors

Sensors forum

FDC1004EVM: SNOC028 - Linux driver