TMAG5273: INTERFACING SUPPORT OF 5273 WITH I1B

Vikas Mathur

Prodigy 10 points

Part Number: TMAG5273

Tool/software:

I NEED to interface TI magnetic sensor 5273b with I1C controller for reading xyz counts and temperature.

4 days ago

0 Scott Bryson 4 days ago

TI__Mastermind 21340 points

Vikas,

Can you please clarify what your support need is here. Can you provide details about the controller you are trying to use?

Thanks,

Scott

0 Vikas Mathur 4 days ago in reply to Scott Bryson

Prodigy 10 points

i m using renesas I1C series controller R5F10NPJDFB .I m using pin 56 /57 of this

i want to read xyx/temp data of sensor

0 Scott Bryson 4 days ago in reply to Vikas Mathur

TI__Mastermind 21340 points

Vikas,

We have some example code for the device here:

https://www.ti.com/tool/TMAG5X73-CODE-EXAMPLE

You'll need to configure these pins you are showing to operate for IIC (I2C) which is the input protocol for TMAG5273. I won't be able to offer you much guidance how to setup the Renesas MCU, but once configured properly you should be able to utilize code from our example file above.

We find a lot of interest in using the MSPM0 family of controllers and I would recommend you check those out too.

Thanks,

Scott

Sensors

Sensors forum

TMAG5273: INTERFACING SUPPORT OF 5273 WITH I1B