• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 286 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Ibis model of TMP4xx

Longchang Chen
Intellectual 1350 points
Other Parts Discussed in Thread: TMP435

customer got the ibis model of TMP4xx and  found there is no curve and C_comp value for model TERM relate to pin DXP1 and DXN1 of TMP435, pls check it. 

  • 0
    TI__Expert 3555 points

    Longchang Chen,

    This is correct. There are no curves or C_comp values for all of the "TERM" terminals in this file. This is not an error or omission. Specifically, TERM was assigned to the analog pins. IBIS models do not model analog pins in any of our products. IBIS models are used to simulate the digital transmissions of I/O pins.