How to Program the newly replaced MSP430F5528IRGC

Bhojaraj G O

Hi experts,

I am using LDC1000 EVM for one of my project.Unfortunately while i am testing the EVM it has gone bad and i troubleshooted the EVM.I found that Micro controller MSP430F5528IRGC Has gone bad so i have replaced with new chip.Can somebody help me how to flash the firmware to this newly assembled chip......

Thanks in advance................

over 11 years ago

0 Chris Oberhauser66 over 11 years ago

TI__Genius 14270 points

You should be able to reprogram the FW using the LDC1000 GUI. The FW is provided as a text file with a .txt extension in the install directory. Launch the LDC1000EVM GUI, go to the Tools menu, and select flash Firmware. You can then press the open button to select the .txt file; then press the update button.

0 Bhojaraj G O over 11 years ago in reply to Chris Oberhauser66

Prodigy 40 points

Thank you chris.

Sensors

Sensors forum

How to Program the newly replaced MSP430F5528IRGC