• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 313 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMP006 Drawing for sample covers?

Bill Norton
Prodigy 230 points

Are there any drawings available for the sample covers shown in the video 

https://www.youtube.com/watch?v=GEGiEi6tcVo

Haven't quite figured out what the cover's footprint would be around the sensor.  It looks like it's about the same OD as the capacitor, but it would help to be sure.

  • 0
    TI__Expert 3370 points

    Hi Bill,

    The TMP007 data sheet (SBOS685) , section 7.3.2 shows how to determine the field of view based on object size and distance.

    The upcoming TMP007 Layout and Assembly Guide will detail layout recommendations for a cover and guidelines for adapting the design to the application requirements,

    Regards,

    Werner