HDC1000 Humidity Measurement Resolution

Hi Kato,

the regiters of the HDC1000 are based on 16bit register, so inorder to set the resolution of the humidity section you have to write16bit.

Default configuration, register 0x02, content : 0x1000 , it means resolution of RH =14bit (I'm no considering the other parameters)

In order to set 11bit resolution, you have to write : 0x1100

In order to se 8bit resolution you habe to write: 0x1200

Please let me know if it helps.

regards,

Domenico

Hi Domenico-san,

Thank you for your quick response.
I have understood the contents which you said since I have read the data sheet of HDC1000.
So, how does HDC100 work if I write 0x1300 to 0x02 ?
I would like to confirm that.

Best Regards,
Kato

Hi Domenico-san,

Thank you for your information.
What may happen if I set 0x1300 to 0x02 ?

Best Regards,
Kato

Hi Kato,

I really do not know what the digital designer has done.

regards,

Domenico

Hi Domenico-san,

Could you please confirm what HDC1000 works if writing 0x1300 to 0x02 ?

Best Regards,
Kato

Hi Kato,

why do ypu want to write 0x1300 in 0x02 register ?

regards,

Domenico

Hi Domenico-san,

Our customer would like to know how HDC1000 works if writing 0x1300 to 0x02 since the users can set it.
In addition, he would like to know whether HDC1000 has the logic failsafe.

Best Regards,
Kato

Hi Domenico-san,

I have informed our customer of your information and this issue has been closed.
Could you please tell me that information if you obtain it about how HDC1000 works ?
Thank you for your support.

Best Regards,
Kato

Hi Kato,

I'll let you know but still I do not understand why the final user should write 0x1300 in the register 0x02.

regards,

Domenico

Hi Domenico-san,

Thank you for your reply.
Our customer would like to know what may happen if he writes 0x1300 to the 0x02 register by mistake simply.

Best Regards,
Kato