• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 1025 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

HDC1080 EVM Programming

Roger
Expert 1330 points
Other Parts Discussed in Thread: HDC1080EVM

Hello,

I want to use this with my own program not with the TI GUI. Is there any info on details of the programming interface?

Roger

  • 0
    TI__Expert 5145 points
    Hi Roger,
    Unfortunately at the moment there is any document available that describes the programming interface between the HDC1080EVM and the TI GUI.
    You can try to look at the firmware itself. You can get it going to

    www.ti.com/.../hdc1080evm

    and download and install the Sensing Solutions EVM GUI Tool v1.8.8 (Rev. A). Once the GUI is installed, you can find the firmware source code for the HDC1080EVM under the folder C:\ti\Sensing Solutions EVM GUI-1.8.8\EVM Firmware.
    Sorry for the inconvenience.
    Best regards,
    Carmine