HDC1080, is calibration necessary when measure point has changed.

Shinichi Inoue

Other Parts Discussed in Thread: HDC1080

Dear Specialists,

My customer is interested in HDC1080 for kind of IOT sensor.

He has a question, could you please advise?

ｗhen measure point has changed from indoor to outdoor, environment is quite different, should HDC1080 be calibrated or not.

Do you have an application note or reference design in this case.

I appreciate your great help.

Best regards,

Shinichi

0 Carmine Iascone over 9 years ago

Hi Shinichi,

HDC1080 is already factory calibrated and do not need any further calibration on the customer side.

About reference designs for IoT applications, please refer to:

Best regards,

Carmine

0 Shinichi Inoue over 9 years ago in reply to Carmine Iascone

Guru 21791 points

Dear Carmine

Thank you for your prompt reply.

I am going to send your advise to the customer.

I appreciate your great help.

Best regards,

Shinichi

Sensors forum