TDC 7200 Minimum pulse width requirement for START and STOP events?

Jonathan Brown37

Hello, I was wondering what would happen if a pulse with a pulse width shorter than the requirement is sent into the TDC 7200 device. The data sheet indicates that the minimum pulse width is 10 ns.

over 8 years ago

0 Vishy Viswanathan over 8 years ago

TI__Mastermind 21685 points

Jonathan,
Start, Stop, and Clock inputs are Schmitt Triggered. It's the rising or falling edge that matters. I have not tested with <10ns pulse width but would guess pulse width variation shouldn't affect.
Thanks,
Vishy

Sensors

Sensors forum

TDC 7200 Minimum pulse width requirement for START and STOP events?