• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 826 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

FDC1004EVM: FDC1004LEVLSEN-EVM PCB sample

Duncan Kerridge
Prodigy 20 points
Part Number: FDC1004EVM
Other Parts Discussed in Thread: FDC1004

Hi , I am working with an MSc student to investigate the use of the FDC1004 sensor for measuring liquid level in some of our products. We do  not have PCB production facilities so I was wondering if you can supply a sample of the FDC1004LEVLSEN-EVM board or point me towards a source. In a previous thread I noticed that samples could be sent via a TI rep, but I purchased both our FDC1004EVM's from RS Components and have no direct contact with TI.

  • 0
    TI__Expert 6480 points
    Hi Duncan,

    Unfortunately, we are only able to send out samples to TI reps - if you tell us your location, maybe we can find the appropriate contact? In the meantime, copper tape usually works well in testing stages.

    Thanks,
    Rachel
  • 0 in reply to Rachel Liao
    Prodigy 20 points
    Hi Rachel,

    We're based in Cardiff, Wales. If you can put me in contact with a TI rep that would be great.

    I have tried a mock up with aluminium tape which seems to work ok, but was thinking a more precise version might be better for a longer term experiment.

    Thanks,

    Duncan