• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 637 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TDC7201-ZAX-EVM: TDC7201 testing issue on Mode 2

Eric Chen4
Expert 2370 points
Part Number: TDC7201-ZAX-EVM
Other Parts Discussed in Thread: TDC7201, MSP-EXP430F5529LP

Hi,

Now use TDC7201+MSP-EXP430F5529LP EVM to verify STD timing on Mode 2 but find it is un-stable result, is it right?

Would you kindly help to check again and if need to adjust other setup from GUI?

Thnaks your help.

TDC_GP21_Test.xlsx

  • 0
    TI__Mastermind 31655 points

    Hello,

    Could you please share the conditions under which these results were produced? Please save a config file with the settings used, and upload it here. Also, where are the input signals (START and STOP) coming from, and what is the expected result?

    Regards,